sales@alamteknik.co.id

(021) 623 09389

(021) 623 09392


Office Hours

8:30 - 17: 00 Mon - Fri

8.30 - 14.00 Sat

ST3-G(-BT) Spintork® Torque Checker

Categories: , ,

Features

 

  • Spintork®, ST3-G Digital Torque Checker is the world’s most compact rechargeable rotary type torque measuring equipment. (Patented)
  • Ideal for routine torque maintenance checks on nutrunners.
    • Allows operators to perform torque checks (routine inspections) of multi-spindle tightening equipment while continuing tightening at the same time. Connecting the optional extension bar, which has the same length as the ST3, to spindles not installed with Spintork® makes it easy to check torque without removing the nutrunner from multi-spindle tightening equipment. This reduces steps in the quality inspection process.
  • Using the Bluetooth® equipped version model ST3-G-BT,its is possible to inspect nutrunners inline and collect torque checks wirelessly.
  • ST3-G is equipped with an angle sensor. If tightening is done with a handheld nutrunner attached to the ST3-G, torque checking and angle checking can be done at the same time as tightening operations. (*Note: Angle measurements are measurements from set snug torque values.)
  • When the supplied USB connecting cable is connected to a PC, tightening torque and angle data determined through measurements using a ST3-G SpinTork Rotary Peak Torque Meter can be analyzed and controlled in Excel format using ExRcv for ST3. (ExRcv for ST3 is complimenary with purchase and available for downloading upon request..)
  • The ST3-G-BT can be used to create torque and angle graphs. With a Bluetooth®-equipped ST3-BT, torque and angle can be measured and recorded continuously, and tightened-to-completion data is transmitted wirelessly to a PC. Then after ExRcv for ST3 collects the data on an Excel file, graphs displaying tightening torque and angle values can be created. (*Note: When the ST3 is not the -BT version, memory stores only angle data at time of recording and maximum torque, and graphs cannot be created.)
  • A Tightening Data Management System can be created for Bluetooth-equipped ST3-BT / ST3-G-BT series devices, through use of the special custom-modified TDMS Software

Specifications

MODEL ST10N3-G ST15N3-6.35-G ST20N3 ST50N3-3/8 ST50N3-1/2 ST100N3 ST200N3 ST500N3 ST1000N3
Bluetooth(R) ST10N3-G-BT ST15N3-6.35-G-BT ST20N3-BT ST50N3-3/8-BT ST50N3-1/2-BT ST100N3-BT ST200N3-BT ST500N3-BT ST1000N3-BT
TORQUE RANGE
[N • m]		 MIN.～MAX. 2～10 4～15 4～20 10～50 20～100 40～200 100～500 200～1000
1DIGHT 0.01 0.02 0.05 0.1 0.2 0.5 1
TORQUE RANGE
[cN • m]		 MIN.～MAX. 200～1000 400～1500 400～2000 1000～5000 － － － －
1DIGHT 1 2 5 － － － －
TORQUE RANGE
[kgf • cm]		 MIN.～MAX. 20～100 40～150 40～200 100～500 200～1000 400～2000 1000～5000 －
1DIGHT 0.1 0.2 0.5 1 2 5 －
TORQUE RANGE
[kgf • m]		 MIN.～MAX. 0.2～1 0.4～1.5 0.4～2 1～5 2～10 4～20 10～50 20～100
1DIGHT 0.001 0.002 0.005 0.01 0.02 0.05 0.1
TORQUE RANGE
[lbf • in]		 MIN.～MAX. 17.6～88 35～132 35～175 88～440 176～880 350～1750 880～4400 －
1DIGHT 0.1 0.2 0.5 1 2 5 －
TORQUE RANGE
[lbf • ft]		 MIN.～MAX. 1.5～7.3 3～11 3～14.5 7.5～36.5 15～73 30～145 75～365 150～735
1DIGHT 0.01 0.02 0.05 0.1 0.2 0.5 1
TORQUE RANGE
[ozf • in]		 MIN.～MAX. 285～1400 560～2100 560～2800 1400～7000 － － － －
1DIGHT 1 2 5 － － － －
DIMENSION
[mm]		 Ｌ’ 75 106.5 75 120 135
Ｅ 46（50） 68.5
Ｃ 49 73
ΦＤ 13 － 18 27 38 51
□ａ 6.35 － 9.53 12.7 19.05 25.4
Φｄ１ 2.1 － 3.1 4.1 6 6.5
Φｄ２ 2.1 － 5 6 6.5
Ａ 53 78
Ｅ 50（52） 71
WEIGHT[kg] 0.25 1.3
Torque Accuracy ±1%+1dight
Angle Measurement Range 0 to 999º ST3-G-BT Communication Specifications
Angle Accuracy ±2º + 1 digit (when rotated by 90º at 30º/sec. to 600º/sec.) Communication System Bluetooth(R)
Direction Right and left Wireless Communication Distance 10m
Display 7-segment LCD display Memory count value: 3 digits (character height: 3 mm), Torque/rotating angle display: 4 digits(character height: 7 mm) Unit, Remaining battery capacity, Measuring direction Continuous Operating Time BT off : Approx. 10 hours
BT on : Approx. 8 hours
Measurement Mode PEAK/RUN
Data Memory 999
Arithmetic Function Number of samples, maximum, minimum and average values
Power Nickel hydrogen battery pack
Continuous Operating Hours Approx. 10 hours ( BT off : Approx. 10 hours )
Charger Input: 100 to 240 V AC ± 10% (conforming to PSE, compliant with CE)
Charging Time Approx. 2 hours
Operating Temperature Range 0 to 40ºC

Notes

  • The Spintork® ST3 series cannot be used when connected to an impact wrench. (Damage to electronic parts could cause equipment failure and inaccuracy.)
  • Japan’s Measurement Law prohibits ST3-G / ST3-G-BT series devices from being used in Japan or sold for use in Japan
  • As of October 2016, ST3-BT and ST3-G-BT series devices can be used in Japan, the U.S. Canada, the EU, Thailand, Mexico, Vietnam, Brazil , China and Taiwan. For other countries, please contact us to enquire.
  • Excel Receiver software is a data input tool for Excel® data management. It can be downloaded for free upon request. *Note: Excel® is a registered trademark of the Microsoft Corporation.
  • For ST3-G-BT Bluetooth version, you need to supply your own dongle (available at retails outlets) or confirm your equipment (PC) has Bluetooth capabilities for Bluetooth® signal reception.
    • BT-Dongles maybe requested for a nominal fee for Tohnichi America sales areas only.

Standard accessories

Quick battery charger BC-4-2, power source conversion plug, power source plug for long-term storage, carrying case, instruction manual, USB connecting cable (No.384; not supplied for –BT models), calibration certificate

Dimensions

Reviews

There are no reviews yet.

Be the first to review “ST3-G(-BT) Spintork® Torque Checker”

Your email address will not be published. Required fields are marked *

Related Products

Hit enter to search or ESC to close

May We Suggest?