［Application］
This control unit is computer controlled to create the most effective
demagnetizing patterns within a short period of time, thus providing the
consistent demagnetizing eff ect constantly. The operation is quite simple. No
complicated adjustment is necessary and an electric valve control circuit for
fl oating is also incorporated. During grinding of workpieces, air at low pressure
[about 20 kPa (0.2 kg/cm2)] is jetted through holes provided on the chuck
work face to prevent intrusion of waste fluid/oil and fine particles. When
unloading the workpieces after the end of grinding, the circuit is automatically
switched over to the high pressure [about 150 kPa (1.5 kg/cm2)] in response
to the demagnetizing command to fl oat the workpieces.
［Features］
●The demagnetizing time is as short as 6 to 15 seconds and consistent
demagnetizing eff ect can be obtained.
●The magnetic force can be adjusted and workpieces can be straightened
also.
●The noise resistance feature ensures consistent performance in certain noisy
environment.
●A compact air unit is incorporated
Reviews
There are no reviews yet.