sales@alamteknik.co.id

(021) 623 09389

(021) 623 09392


Office Hours

8:30 - 17: 00 Mon - Fri

8.30 - 14.00 Sat

BLA Torque Error Proofing Wrench

Categories: , ,

Features

Wireless Solar Powered Error Proofing Torque Wrench

Upon tightening completion, transceiver sends signal to receiver and counter or PLC to track and control tightening assembly work. Solar powered transceiver module eliminates costs relating to battery maintenance.

  • 902.875 MHz Transmitting Frequency
  • Multiple wrench to one receiver Capabilities: 10 wrenches; 4 Contact signal outputs; 6 RS232C outputs
  • Transceiver Powered Solar Panel:
    • Round top shape keeps solar panel positioned to capture light
    • 3000 uses within 8 hours in standard work environment
    • Min. 400 uses in low or no light conditions with base charge
    • Robust plastic case, with internal antenna (Optional Rubber Cover Sold Separately)
  • Quick communications setting with one click
    • Receiver (R-BLA ), captures signal from multiple wrenches & identifies by serial numbers
    • No setting box required for this model series
  • Transmission distance: 10-20 meters (30-60 feet)
  • Order wrench and receiver box to complete one basic system
  • Receiver box (R-BLA) can be connected directly to DC24V or with Optional (AC Adapter #BA-8)
    • Optional LAN output version available
  • Use under normal interior illumination in an ordinary factory
  • Easily convert any Tohnichi LS-type corded torque wrenches to BLA solar powered by purchasing T-BLA transmitter only
  • The T-BLA/QLBLA is for use only in the U.S., Canada and Mexico.
    • (The T-BLE/QLBLE model is available for use in the EU and China. The T-BL/QLBL is for use only in Japan.)
  • Conforms with technical standards of the U.S. and Canada.
  • BLA wrenches are available in a variety of click wrench types. (Shown in photos are QL Adjustable and SP Open end Head.)
    • Most popular wrench type is CSP Interchangeable Head Preset Type.
    • Preset Types are best fo assembly work, as user cannot easily or mistakenly change the torque set value.
    • Interchangeable head type give flexiblity in work type. Heads sold separately.
    • If other type wrench styles are required, please contact Tohnichi for the specific model numbers.

Specifications

MODEL Transceiver Module Receiver
T-BLA R-BLA
FREQUENCY BAND 902.875MHz
MODULATION SYSTEM FSK
MODULATION RATE 125kbps
ID ID 8 digits fixed, not selectable
INPUT / OUTPUT LED in red Output : Relay x 4, RS232C
Input : Reset-in, LS-in
POWER Solar cell DC24V(18～36V)
Power consumption less than 5W
ANTENNA Whip antenna Dipole antenna
OPERATING TEMPERATURE RANGE 0～40℃
TRANSMITTING RECEVING DISTANCE About 10 to 20m
ACQUISITION OF LICENSE US : FCC Canada : IC
MODEL CSPBLA25NX10D CSPBLA50N3X12D CSPBLA50N3X15D CSPBLA100N3X15D CSPBLA140N3X15D CSPBLA200NX19D CSPBLA280N3X22D CSPBLA420NX22D
TYPE *Preset with Interchangeable Head (Heads sold separately)
Additonal Models Contact Tohnichi for additional Models for different types of click wrenches with BLA modules
TORQUE RANGE
[N • m]		 MIN. ～MAX. 5～25 10～50 20～100 30～140 40～200 40～280 60~420
TORQUE RANGE [kgfcm/Kgfm] MIN. ～MAX. kgf.cm.

50~250

 100~500 200~1000 300~1400 400~2000 kgf.m

4~28

 6~42
TORQUE RANGE [lbf.in] MIN. ～MAX. 50~200 100~400 200~850 300~1000 350~1600 350~2500 600~3600
DIMENSION
[mm]		 EFFECTIVE
LENGTH		 L 186 208 218 291 350 445 660 950
OVERALL
LENGTH		 L’ 195 215 220 290 350 430 625 920
BODY m 19 25.5 28 35 38.6
n 9.2 11.2 12.2 15 16.1
d 15 20 21.7 27.2
D 37 38.5 40 51.5
d3 10 12 15 19 22
Accuracy ±3% *Other wrench types available upon request.

Notes

Note 1: This product can be used in the U.S., Canada, Mexico and Colombia.
Note 2: Effective distance between transmitter and receiver depends on radio wave environment. In some cases it may be shorter than expected.
*Note: Causes of transmission errors include: ambient noise; an obstacle between the transmitter and the receiver; dead points caused by signal reflection from metal, concrete, or other material that prevents direct transmission to the receiver antenna.
* Note 3: Solar cells power the transmitter, so the equipment should be used in lighting conditions exceeding 200lx.
* If starting with a battery at zero charge, under lighting of 200lx about 3 minutes are required before first transmission.
* At full battery charge, under completely dark conditions (0lx), signals would still be emitted for more than 1,800 tightening operations.
* After full battery charge is reached, if the unit is stored in complete darkness (0lx), the charge would be depleted after about 6 days.
* Even while the torque wrench is in operation, the solar cells will still charge the unit under lighting of at least 200lx, so there is no need to charge fully before use.

Dimensions below are for BLA on QL wrench. Refer to basic wrench page (ex. CSP) for other model basic dimensions.

Dimensions

Reviews

There are no reviews yet.

Be the first to review “BLA Torque Error Proofing Wrench”

Your email address will not be published. Required fields are marked *

Related Products

Hit enter to search or ESC to close

May We Suggest?