MAGTAP*

［Application］
A tool designed to facilitate tapping of prepared holes in iron and
steel plates, secured with a powerful magnet. Available in two
types: permanent magnet and electromagnet. Tapping can be done
either by manual tapping or using an electric tapper.
［Features］
● The Magtap uses its strong holding power to secure a stable
mounting position and posture for easy tapping.
Information about commercially available tap holders for tapper UT-14Y
… Tap holder sets/major dimensions and applicable taps (Use commercially available holders according to tap sizes.)

Model MTP MAGTAP*
■MTP-13B《Manual tapping type》
●Small and light weight for easy carrying around.
●The tap guide holder to facilitate accurate tapping in horizontal
and vertical faces.
●Wear and damage of taps can be prevented.
●The magnet used is a powerful permanent magnet.
■MTP-25A《Ratchet type》
●Tapping can be done only by repeating back-forth movement with
the ratchet lever.
●The magnet used is a powerful electromagnet.
■MTP-MT8《Electric type》
●The revolution can be varied steplessly according to tap sizes.
●Small and light weight for easy carrying around.
●The tapper can be changed to an electric drill by changing the
mounting fixtures.
■MTP-MT16《Electric type》
●Speedy tapping can be achieved by the impact method.
●The back-forth and right-left adjusting mechanism is incorporated.
●The tapper can be changed to an electric drill by changing the
mounting fixtures. (The main unit is the same as KANETEC
Magbore KCD-1NB, but the lock handle faces an opposite
direction.)